How To Repair A Bulge In A Carpet

How to Fix Rug Burl & Ridges

When a carpet begins to bulge and ridge, it needs to be restretched. You lot do non need to call a flooring visitor to do this projection for y'all. With a few simple carpet tools, you lot can hands restretch your rug past yourself. Before y'all begin this project, remove every slice of article of furniture from the room.

Stretch your carpet to remove bulges and ridges.

Y'all will demand to exist able to easily pull the rug tight, and furniture will hamper doing so.

Pull back the carpeting and pad from one of the room'south corners, about 2 to iii feet down both walls. The corner to select is based on which direction you volition be stretching your carpet. Choose a corner across from the bulge so that when you stretch the carpet toward the corner, the carpet will flatten. Pull each staple out of the carpet pad using pliers.
Gear up upward an automated carpet stretcher on the floor, confronting the wall across from the corner where you loosened the carpeting. Use the carpet stretcher's extension tubes to extend the stretcher'southward other end straight across the room, stopping approximately half-dozen inches from the opposite wall.
Button downwardly on the carpet stretcher'due south handle to pull the carpeting toward the wall and flatten the bulge and ridges in the carpet. Merely pull the carpeting until the ridges are gone. Overstretching a carpet will result in tears.
Bending the rug stretcher toward the loose corner, and stretch the carpet toward the corner. If your carpet has many bulges and ridges, it will be necessary to loosen two corners, one next to the other. Motion the carpet stretcher along the opposite wall every eighteen inches, pulling the rug toward the loose corners until all ridges have been removed.
Identify a knee kicker on the rug about the loose corner, about 3 inches from the wall. Hit the human knee kicker with your knee joint to button the carpet toward the wall, and claw it over the tack strip. Move the knee kicker downwardly about 6 inches and repeat. Go on until you have reattached the loose corner to the tack strips.
Use a carpet tool to stuff the carpet between the tack strip and the wall. Cut the actress carpeting off using a carpet cutter.